Quick Answer: How To Adjust Mountain Bike Suspension?

Why is my suspension so stiff MTB?

Preload is HOW STIFF is the suspension, and it’s related to how much force must be applied to compress it. More preload means you need more force (apply more weight) to compress the fork by a given distance or travel. If you feel that it takes too much force to compress your fork, it means you have too much preload.

How do I know if my mountain bike shocks are bad?

Weird noises coming from the shocks or forks that sound like grinding, clunking, and slurping. This is a sign that it may need to be replaced or in need of a service. All so if the rear shocks are swishing or slurping means that the damper oil is cavitated, in which case it needs to be replaced.

What PSI should my mountain bike shocks be?

Often yes, usually rear shocks run 100-200psi, but fork psi varies a lot, depending on the design. Get the sag around 25% (maybe slightly less sag in the front than the rear) and see how it rides (that’s what really matters), adjust on the trail as needed.

How much air do I put in my mountain bike forks?

Measure the amount of travel is you don’t know how much travel you have. Ideally for an XC set-up, you want to start with 25% sag. Push the rubber O-Rings down the base of the shock and fork. Have your friend hold up your bike facing you and holding the handlebars with the front tire between their knees.

You might be interested:  Quick Answer: How Were The Andes Mountains In South America Formed?

When should I lock my mountain bike suspension?

Usually the only times you would lock out your rear shock (or front fork) would be when on a long non-technical climb, or other long distance ride. Mountain bike suspension often features multiple modes, to better set up the bike to climb or descend, and one of these common features is the lock out.

What pressure should my front forks be?

On the biggest stuff you hit, you should be close to bottoming or bottoming but not hard. If you’re running into not using all the travel, drop the pressure in small 5psi decrements. If you’re bottoming, raise pressure a bit.

Is it bad to bottom out MTB suspension?

“You should bottom out a couple of times a ride on the trail you ride the most and feel the most confident on,” says Fitzsimmons. “If the terrain is steep, it will be hard to bottom out the fork unless it’s a jump, drop off, or impacting large braking holes entering a turn.

Leave a Reply

Your email address will not be published. Required fields are marked *